YSI IQ S ENSOR N ET MIQ/CHV PLUS - Manual (Page 35)

MIQ/CHV PLUS Technical data
7 - 3 ba76036e01 01/2012
Instrument safety
EMC product and
system characteristics
Terminal connections
Applicable norms – EN 61010-1
EN 61326 EMC requirements for electrical resources
for control technology and laboratory use
– Interference immunity according to
EN 61326/A1 table A.1
– Resources for industrial areas, intended
for indispensable operation
– Interference emission limits for
resources of class B
System lightning
protection Noticeably extended qualitative and
quantitative protective characteristics as
opposed to EN 61326/A1 table A.1
FCC, class A
IQ S ENSOR N ET
connections
2
Additional connectable SENSORNET
terminator (terminating resistor)
Note:
If the valve is controlled via an external
switch, only one SENSORNET connection
can be used due to the limited number of
cable glands. SENSORNET connection 1
or 2 can be selected.
Valve switching contact 1
Terminal type Screw-type terminal strip, accessible by
opening the lid
Terminal ranges Solid wires:
Flexible wires:
0.2 ... 4.0 mm
2
AWG 24 ... 12
0.2 ... 2.5 mm
2
Cable feeds Cable glands M16 x 1.5 on the underside of
the module