YSI IQ S ENSOR N ET MIQ/CHV PLUS - Manual (Page 11)

MIQ/CHV PLUS Installation
3 - 1 ba76036e01 01/2012
3 Installation
3.1 Scope of delivery
The following parts are included in the scope of delivery of the MIQ/
CHV PLUS:
 MIQ/CHV PLUS
 2 x screwed cable glands with seals and blind plugs
 2 x ISO blind nuts M4
 2 x cheese-head screws M4x16 with plastic washer
 1 x contact base
 2 x plastic tapping screws for fixing the contact base
 1 x hose clip

Operating manual.
3.2 Software requirements
System 182 (XT) Operation of the MIQ/CHV PLUS in the System 182 (XT) requires a
software version of 3.15 or higher on the DIQ/S 182 Universal
Transmitter.
System 2020 XT Usage of the Sensor-controlled function with the system 2020 XT
requires a controller software version of 2.80 or higher.
Note
It is possible to update the software if your components have older
software versions. Please contact YSI.
3.3 Mounting for use in the IQ S ENSOR N ET
The IQ S ENSOR N ET provides a number of options for integrating the
MIQ/CHV PLUS mechanically and electrically in the system (stacked
mounting, distributed mounting, etc.). The individual types of
installation are described in detail in the I
NSTALLATION chapter of the
system operating manual.