YSI 5000 - Manual (Page 30)

27
Store
Press the [STORE] soft-key to enter Store mode and display the following menu.
8.15
*
mg
/L
24.38°C 11:33 AM
UP DOWN DIGIT SAVE
The Store menu is used to control the storing of data. The current record number is shown in the
display on the right side.
Press the [SAVE] soft-key to store the values currently displayed. The message “Record X SAVED”
(where X is the record number) will momentarily be displayed on the screen and the record
number will increase to the next memory location.
8.15
*
mg
/L
24.38°C 11:33
AM
Record 1 SAVED
UP DOWN DIGIT SAVE
If you wish to store a record at a location other than the current one, use the [UP], [DOWN] and
[DIGIT] soft-keys to select the memory location desired.
If the current record location contains data, you will see the following display to warn you that
the current memory location contains data.
8.15
*
mg
/L
24.38°C 11:33
AM
UP DOWN DIGIT SAVE
Store
Record: 01
Store
Record: 02
Record: 01
Record Full
Store
Record number
Message
WARNING
Record number