Xylem handylab OX 12 - Manual (Page 42)

Operation handylab Ox 12
42 ba75369e04 01/2011
4.6 Configuration
You can adapt the measuring instrument to your individual requirements. To
do this, the following parameters can be changed (the status on delivery is
marked in bold):
Note
You can leave the configuration menu at any time with . The parameters
that have already been changed are stored.
Baud rate
Baud rate 1200, 2400, 4800, 9600
Air pressure display Current value in mbar
(no input possible)
AutoRange ARng On or off
Calibration interval (Int 3) 1 ... 14 ... 999 d
Date/time Any
1 Switch off the measuring instrument.
2 Press the key and hold it down.
3 Press the key.
The display test appears briefly on the display. The measuring instru-
ment then switches automatically to the setting of the baud rate.
4 Select the required Baud rate with <
▲> <▼>.
5 Confirm with . The current air pressure in mbar ap-
pears on the display.
Day.Month No.
Time
1 2
M
m
% mg/l
cm
S/ cm
S
mbar
mV/pH
t n
Store Auto
LoBat
Tref25
nLF
/ K %
RCL
Sal
°
AR
TP
C
cm 1/
° F
ARng Cal Lin
Tref20
Sal TDS O UpH
AutoCal DIN
AutoCal TEC
Ident Year
0 0 8 4 Baud