Xylem handylab OX 12 - Manual (Page 38)

Operation handylab Ox 12
38 ba75369e04 01/2011
4.4.4 Clearing the memory
With this function, you can delete stored data records. 800 storage locations
will then be available again.
Note
The Clear memory function only appears when there are data records stored
in the memory. Otherwise, the measuring instrument automatically switches
to the measuring mode.
Proceed as follows to clear all data records:
Note
The calibration data remain stored and can be called up.
1 Switch off the measuring instrument.
2 Press the key and hold it down.
3 Press the key.
The display test appears briefly on the display.
Subsequently, Sto clr appears.
4 Confirm the clearing process with .
Pressing any other key prevents the clearing, the data records will re-
main stored.
RCL
d
Auto
Ident
S 1
LoBat
Tref25
nLF
/ K %
Sal
°
AR
TP
C
M
m
% mg/l
cm
S/ cm
cm 1/
° F
ARng Cal Lin
Tref20
Sal TDS
mbar
O UpH
mV/pH
AutoCal DIN
AutoCal TEC
Time Baud
Day.Month No.
Year
r
S t o
c l
Store