Xylem handylab LF 12 - Manual (Page 35)

handylab LF 12 Operation
35 ba75367e04 01/2011
Note
The AutoStore function is interrupted if you start other functions, e.g. output
the data storage.
After the function is finished, the AutoStore function is continued. By this,
however, temporal gaps in the recording of the measured values will occur.
Switching off
AutoStore
Switch AutoStore off by:
z setting the save interval (Int 1) to OFF, or
z switching the measuring instrument off and then on again.
6 Confirm with .
The prompt for the ID number appears on the display.
7 Set the required ID number with <V> <W>.
8 Confirm with .
The instrument switches to the measuring mode and starts the
measuring and saving process.
AutoStore flashes on the display.
e r F
9 9 9 S 1
LoBat
Tref25
nLF
/ K %
RCL
Sal
°
AR
TP
C
M
m
% mg/l
cm
S/
cm
cm 1/
° F
ARng Cal Lin
Tref20
Sal TDS
mbar
O UpH
mV/pH
AutoCal DIN
AutoCal TEC
Time Baud
Day.Month No.
Year
1
Store Auto
Ident