Xylem handylab LF 12 - Manual (Page 34)

Operation handylab LF 12
34 ba75367e04 01/2011
4.4.2 Saving automatically
The save interval (Int 1) determines the chronological interval between auto-
matic save processes.
After the fixed interval has expired, the current data record is transmitted to
the storage and to the interface.
Setting the save
interval
The default setting for the save interval (Int 1) is OFF.
By this, the AutoStore function is switched off.
To switch the function on, set an interval (5 s, 10 s, 30 s, 1 min, 5 min, 10 min,
15 min, 30 min, 60 min):
1 Press the key and hold it down.
2 Press the key. Int 1 appears on the display.
3 Set the required interval between the saving procedures with
<V> <W>.
4 Confirm with .
The number of free memory locations appears on the display.
5 As soon as all of the 800 storage locations are occupied,
AutoStore is terminated (Int 1 = OFF).
If there are not enough storage locations available for your
measurements:
– Output and backup the data storage (see page 36) and
– clear the memory (see page 40).
LoBat
Tref25
nLF
/ K %
RCL
Sal
°
AR
TP
C
M
m
% mg/l
cm
S/ cm
S
8
cm 1/
° F
ARng Cal Lin
Tref20
Sal TDS
mbar
O UpH
mV/pH
AutoCal DIN
AutoCal TEC
Time Baud
Day.Month No.
Ident Year
F F O
t 1 n 1
Store Auto