Xylem HandyLab 750(EX) - Manual (Page 51)

51
51
Data Logger
Starting the Data Logger using CONT
Prerequisite: Data logger is confi gured. Every time the meter has been swit-
ched off, the data logger must be restarted (exception: SHOT).
Measurement
Measured value is maintained
Logger: CONT blinks
Address of the last recorded
value + 1 blinks
(proposed start address) If desired: Select start address using
.
The measured value is saved to the selected start address (exception:
SHOT).
“… FREE MEMORY” is displayed.
“LOGGER” and “active logger type” icons are displayed.
Starting the Data Logger using START
Prerequisite: Data logger is confi gured. All existing entries are deleted. The
start address for saving the values is 0001. Every time the meter has been
switched off, the data logger must be restarted (exception: SHOT).
Measurement
Measured value is maintained
Logger: CONT blinks
Logger: START blinks
All entries will be deleted. “5000 FREE MEMORY” is displayed.
“LOGGER” and “active logger type” icons are displayed.