Xylem HandyLab 750(EX) - Manual (Page 39)

39
39
Start-Up
Switching On the Meter
When you have connected the sensor, you can switch the me-
ter on by pressing the on/off or meas key.
When the meter is switched on with the on/off key, fi rst a self
test is performed and then the calibration data and settings are
displayed before the meter switches to measuring mode.
When the meter is switched on with the meas key, it immedia-
tely switches to measuring mode.
Depending on the connected sensor and the specifi c measu-
ring task, several steps for confi guration and calibration must
be performed as described on the following pages.
Battery char-
ging level
Memosens sensor
Temperature
detection
(sensor,
separate or
manual)
Date Logger
active
Time
Error message
Sensor
condition
Process
variable
Icons
Important information about the state of the device: