Xylem HandyLab 200 - Manual (Page 33)

HandyLab 200 Operation
33 ba77063e01 03/2014
4.4.6 Displaying calibration records
Displaying the
calibration record
The calibration record of the last calibration is to be found under the
menu item, Calibration / Calibration record. To open it in the measured
value display, press the
_
> key.
4 Immerse the conductivity measuring cell in the control standard
solution, 0.01 mol/l KCI.
5 Start the measurement with .
The [AR] status indicator is displayed. The measured parame-
ter flashes.
6 Wait for the end of the AutoRead measurement or accept the
calibration value with .
The calibration record is displayed.
7 Using /[Continue] or , switch to the measured
value display.
ϰ
0.479 1
/cm
25.1
°C
15.03.2014
10:00