beautypg.com

Product warranty, Wash the skin and eyes – Xylem 10 001 247 R2 TechnoForce Package System User Manual

Page 8

background image

• Rinse the components in water after you disassemble the pump.
• Do not exceed the maximum working pressure of the pump.
• Do not open any vent or drain valve or remove any plugs while the system is

pressurized. Make sure that the pump is isolated from the system and that pressure is
relieved before you disassemble the pump, remove plugs, or disconnect piping.

• Never operate a pump without a properly installed coupling guard.

Wash the skin and eyes

Follow these procedures for chemicals or hazardous fluids that have come into contact
with your eyes or your skin:

Condition

Action

Chemicals or hazardous

fluids in eyes

1. Hold your eyelids apart forcibly with your fingers.
2. Rinse the eyes with eyewash or running water for at least 15 minutes.
3. Seek medical attention.

Chemicals or hazardous

fluids on skin

1. Remove contaminated clothing.
2. Wash the skin with soap and water for at least 1 minute.
3. Seek medical attention, if necessary.

Product warranty

Coverage

Xylem undertakes to remedy defects in products from Xylem under these conditions:

• The faults are due to defects in design, materials, or workmanship.
• The faults are reported to an local sales and service representative within the warranty

period.

• The product is used only under the conditions described in this manual.
• The monitoring equipment incorporated in the product is correctly connected and in

use.

• All service and repair work is done by Xylem authorized personnel.
• Genuine Xylem parts are used.
• Only Ex-approved spare parts and accessories authorized by an EX-approved Xylem

representative are used in Ex-approved products.

Limitations

The warranty does not cover defects caused by these situations:

• Deficient maintenance
• Improper installation
• Modifications or changes to the product and installation made without consulting an

Xylem authorized representative

• Incorrectly executed repair work
• Normal wear and tear

Xylem assumes no liability for these situations:

• Bodily injuries
• Material damages
• Economic losses

Introduction and Safety

6

TechnoForce Package System Mechanical Installation, Operation, and Maintenance Manual