Acer AT310 F1 - Manual (Page 59)

41
Replacing the processor and
heatsink fan assembly
Notes:
• Always connect the power cord last and always remove it before
adding, removing or changing any hardware components. Make
sure that you install the processor in the CPU socket before you
install the CPU heatsink fan assembly.
• If you buy a processor separately, make sure that you use an
Intel-certified multidirectional heatsink fan assembly only.
• Make sure to install the mainboard in the server before you
install the CPU heatsink fan assembly.
• When receiving a mainboard without a processor pre-installed,
make sure that the plastic CPU socket cap is in place and none of
the socket pins is bent; otherwise, contact your retailer
immediately.
Removing and installing the heatsink fan
assembly
Removing the heatsink fan assembly
Warning! We do not recommend that the processor or the
heatsink assembly be removed. However, if you do need to
uninstall the heatsink fan assembly, please follow the instructions
below to prevent damage to the processor or the CPU socket.
1 Perform the pre-installation instructions described on page 28.
2 Remove the side panel described on page 36.
3 Lay the server on its side (components showing).