Acer Altos R5250 - Manual (Page 55)

37
3 Remove the new HDD from its protective packaging.
4 Install the new HDD to the HDD carrier.
(1) Install a hard disk on the HDD carrier (A).
(2) Secure it with the four screws that came with the HDD carrier
(B).
5 With the lever still extended, slide the HDD carrier all the way into
the drive bay (A). Do not push on the lever until it begins to close
by itself.
6 Use the lever to push the HDD carrier until it docks into place, then
close the HDD carrier lever (B).
7 Install the front bezel. Perform the instructions described in “To
install the front bezel” section on page 29.
8 Setup the new hard drive’s RAID configuration.
For related instructions, refer to “RAID configuration utilities”
section on page 100.
B
A
B
B
A