Turning on the system – Acer Altos R5250 User Manual
Page 39
21
Turning on the system
After making sure that you have properly set up the system, applied
power, and connected all necessary peripherals, you can now power on
the system.
To power on the system:
1
Remove the front bezel (A).
2
Press the power button (B).
The system starts up and displays a welcome message on the monitor.
After that, a series of POST messages appears. The POST messages
indicate if the system is running well or not.
Note: If the system does not turn on or boot after pressing the
power button, go to the next section for the possible causes of the
boot failure.
Aside from the POST messages you can determine if the system is in
good condition by checking if the following occurred.
•
The power indicator on the front panel lights up green.
•
The Num Lock, Caps Lock, and Scroll Lock indicators on the
keyboard light up
B
A