Acer Altos R5250 - Manual (Page 34)

1 System tour 16
* The status/fault LED indicator is only enabled when the optional BMC module is installed
on the mainboard. To purchase this option, contact your local Acer representative.
Hot-plug HDD LED indicator
A drive activity LED indicator is mounted on the hot-plug HDD carrier.
The table below lists the possible drive states.
LAN port LED indicators
Status/fault* Green On System in normal mode.
Amber On Critical system threshold breach
Access the Setup utility and view the
system event log for details.
Status Green Amber Description
HDD access Blinking — Ongoing hot-plug HDD activity
HDD failure — On Hot-plug HDD failure
HDD rebuild Flashing green/amber HDD is rebuilding data.
Indicator Color Status Description
Network
speed
(left) Amber On GbE link network access
Green On 100 Mbps link network access
— Off 10 Mbps link network access
Network
connection
(right) Green On Active network link
Blinking Ongoing network data activity
Off Off-line network
Indicator Color Status Description