Acer PD726 - Manual (Page 37)

... English
Wireless projection
Introduction
This section will introduce wireless projection function for this projector. The
wireless projection function is only available for the model which is equipped
with integrated Acer Wireless Presentation Gateway (WPG) module. Acer WPG
enables multiple users to connect to an Acer projector wirelessly. This eliminates
the need to plug and unplug cables, enabling more effi cient use of meeting time,
especially when there is more than one presenter in a meeting.
To perform wireless projection, you have to change the input source type to
“Wireless” by pressing the “Wireless” button on the remote control or the
“Source” button on the control panel or remote control.
System Requirements :
- Operating system: Windows ® 2000 or Windows ® XP
- CPU: Intel ® Pentium ® III at 750 MHz or equivalent with 128 MB of RAM
- Wireless LAN: IEEE 802.11b/g enabled
- Internet Browser: Internet Explorer 5.0 or above
I/O Interface:
3 4 5 1 2
No. Item Description
1 Antenna connector For attaching the external antenna.
2 Status LED Indicates the WPG’s status.
3 Reset button
A quick press on the the Reset button will reset
the WPG without changing any user's settings.
Press and hold Reset button for more than 4
seconds to reset the WPG to its factory default
settings.
4 Audio-out jack
For outputting audio signals received
wirelessly from the PC.
5 RJ-45 Ethernet jack
For connecting the WPG to the Internet via a
LAN.