Acer PD726 - Manual (Page 22)

0 English ...
User Controls
RGB
 Press “RGB” for true-color optimization.
Brightness
 Press “Brightness” to adjust the brightness of the image.
Color
 Press “Color” to adjust the color temperature of image.
Contrast
 Press “Contrast” to control the difference between the lightest
and darkest parts of the picture.
VGA
 Press “VGA” to change source to VGA-In connector. This
connector supports Analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
Component
 Press “Component” to change source to component connector.
This connector supports YPbPr (480p/576p/720p/1080i) and
YCbCr (480i/576i)
Video
 Press “Video” to change source to Composite Video source.
S-Video
 Press “S-Video” to change source to S-Video source.
DVI
 Press “DVI” to change source to DVI connector. This connector
supports Digital RGB, YPbPr (480p/576p/720p/1080i), YCbCr
(480i/576i).
HDMI
 Press “HDMI” to change source to HDMI. This connector can
support to carry all standard and high-definition consumer
electronics video formats.
Language (For PD726W/PD727 Series only)
 Choose the multi-lingual OSD menu.
Wireless (For PD726W/PD727W only)
 Press “Wireless“ to display the image which is wirelessly
transmitted from PC to the projector via “Acer eProjection
Management“ utility.