Armasight NSGNYX7P01P3DA1 Nyx7 PRO GEN 3P Night Vision Goggles - Manual (Page 31)

31
4.5 SERVICE/PACKING AND UNPACKING
For service, repair or replacements, please email: [email protected].
To assist the Service Representative (SR) with determining if the item is repairable, please provide the
following information:
1. Serial Number of the defective item.
2. Thorough description of the malfunction, defect or damage.
3. An explanation of how the malfunction, defect or damage occurred, if known.
If the SR determines that the item is under warranty or should be returned for repair, a Return
Material Authorization number (RMA#) will be provided. RMA can be obtained via e-mail to
[email protected] or via phone by calling Armasight Customer Service at (888)959-2259
Ext. 2 or via fax (888)959-2260.
When returning the Nyx-7 PRO for service or repair, the following procedures should be followed to
prevent any additional damage:
1. Verify that the Nyx-7 PRO is free of all contaminants such as dirt or any other foreign material.
2. Remove the battery.
3. Place the cap over the lens.
4. Place the Nyx-7 PRO in the hard shipping/ storage case or soft carrying case (if available). If the hard
shipping/ storage case is not available, individually package each Nyx-7 PRO unit being returned in a
suitable container.
Place the Nyx-7 PRO and a copy of the test report or detailed description of the failure in a suitable
packing/ shipping container. Mark the package with the RMA#. Ship the items using the fastest, most
easily traceable, prepaid method to:
Armasight Inc.
815 Dubuque Avenue
South San Francisco, CA 94080
USA.