Armasight NSGNYX7P01P3DA1 Nyx7 PRO GEN 3P Night Vision Goggles - Manual (Page 16)

16
Helmet Mount #4
Helps to mount the goggles to a range of ballistic helmets. ANHM000001
IR850 Detachable Long Range Infrared
illuminator w/Dovetail to Weaver Transfer Piece #21
Long-range infrared illuminator. Provides greater viewing
capabilities when the environment has little or no ambient
light. Comes fully assembled with a dedicated mount in order
to be installed on a Picatinny/Weaver rail. ANKI000017
IR850W Detachable Wide Angle Adjustable X-Long Range
IR Illuminator w/Dovetail to Weaver Transfer Piece #21
A detachable LED extra long-range infrared illuminator with
wide-angle adjustable beam (2 to 30 degrees). Comes fully
assembled with a dedicated mount in order to be installed on
a Picatinny/Weaver rail. ANKIW00017
Transfer Adapter to PVS7/PVS14 Headset/Helmet #59
Mounts goggles to Standard US Mil Headset (PVS7/PVS14
type) and/or helmet. ANAM000034
Hard Shipping/Storage Case #101
A protective case used for the shipping/ storage of the Nyx-7
PRO and its accessories. ANHC000001
2.5 KEY FEATURES
High Quality Gen 2+/ 3 intensifier tube
–
Super fast lens system provides the user with a clear, sharp image
–
Dual eye viewing system for long viewing sessions
–
Automatic bright light cut-off system to protect the intensifier tube
–
LED lights visible in the eyepiece viewing area that indicate operation of the bright light cut-
–
off system and IR illuminator, as well as to alert the user of a low battery
Built-in IR illuminator
–
Lightweight
–
Compact and robust design
–
Easy to operate
–
Serviceability under severe conditions
–
High-performance
–
Highly reliable
–
Powered by single CR123A or AA battery
–
Head or helmet-mountable for hands-free usage
–
Automatic OFF feature with flip-up head/ helmet mount
–
Manual gain control (Nyx-7 PRO MG version) for the best possible image contrast under very
–
high and very low light conditions
Interchangeable lenses for different magnification
–
Waterproof
–
Limited two-year warranty
–