Armasight NSGNYX7P01P3DA1 Nyx7 PRO GEN 3P Night Vision Goggles - Manual (Page 18)

18
Install the AA battery as follows:
1. Unscrew the battery cap (A).
2. Unscrew the battery adapter (C) from the cap, turn it around, and screw in the other end.
3. Insert the AA battery (D), observing the polarity markings as indicated on the body of the device.
4. Screw the battery cap (A) back into place.
3.1.2 MOUNTING THE NYX-7 PRO TO A GOGGLE KIT
Mount the Nyx-7 PRO to the optional goggle kit as follows:
1. Put on the goggle kit. Adjust the goggle kit strap pads until the goggles fit securely around your
head. Remove the goggle kit.
2. Loosen the screw (A). While pushing down on the button (B), insert the Nyx-7 PRO rail into the guide
(C) of the goggle kit bracket. Tighten the screw (A).
3. Put on the goggle kit, now mounted with the Nyx-7 PRO.
4. To adjust the equipment for greater comfort, loosen the screw (A) and move the unit along the guide (C).
5. The goggle kit has a flip-up mechanism. Push the button (D) of the goggle kit bracket and lift the
unit up until it reaches its topmost position. The unit will automatically turn off when it reaches this
position.
6. Push the same button (D) to lower the unit into the correct viewing position. Turn the unit back on to
continue your session (rotate the function switch to OFF position and then to ON position).
7. Push the button (E) and move the unit along the slide-rail (F) until the most comfortable position is
reached.
8. To remove the Nyx-7 PRO from the goggle kit, loosen the screw (A), push the button (B), and slide the
unit out of the bracket guide (C).
3.1.3 MOUNTING THE NYX-7 PRO TO A HELMET
An optional flip-up helmet mount can be used to attach the Nyx-7 PRO to a helmet. The helmet mount
fits the Nyx-7 PRO securely onto the helmet via a rugged strapping device and grooved hooks. With
the helmet mount, the Nyx-7 PRO can be positioned directly in front of the user’s eyes, or flipped back-
wards, out of the field of view.
Mount the Nyx-7 PRO to a helmet as follows:
1. Attach the mount to the helmet as shown in Figure 3-3.
2. Adjust and tighten the straps (A).
FIGURE 3-2. MOUNTING NYX-7 PRO TO A GOGGLE KIT
A
B
C
D
E
F