Analytical Industries GPR-2500 A Oxygen Analyzer - Manual (Page 41)

41
Fire and Explosion Data
Flash and Fire Points
Not applicable
Flammable Limits Not flammable
Extinguishing Method Not applicable
Special Fire Fighting Procedures Not applicable
Unusual Fire and Explosion
Hazards
Not applicable
Reactivity Data
Stability Stable
Conditions Contributing to
Instability
None
Incompatibility Avoid contact with strong bases
Hazardous Decomposition
Products
Emits toxic fumes when heated
Conditions to Avoid Heat
Spill or Leak
Steps if material is released
Sensor is packaged in a sealed protective plastic bag, check the sensor
inside for electrolyte leakage. If the sensor leaks inside the protective
plastic bag or inside an transmitter sensor housing do not remove it
without rubber or latex gloves, safety glasses and a source of water.
Flush or wipe all surfaces repeatedly with water or wet paper towel.
Use a fresh towel each time.
Waste Disposal Method In accordance with federal, state and local regulations for battery
disposal.
Health Hazard Information
Primary Route(s) of Entry
Ingestion, eye and skin contact
Exposure Limits Acetic Acid - ACGIH TLV / OSHA PEL 10 (TWA); Lead - OSHA PEL .05
mg/cubic meter
Effects of Exposure -
Ingestion Electrolyte could be harmful or fatal if swallowed; Oral LD50 (RAT) =
6620 mg/kg
Eye Electrolyte is corrosive and eye contact could result in permanent loss
of vision.
Skin Electrolyte is corrosive and skin contact could result in a chemical
burn.
Inhalation Liquid inhalation is unlikely.
Symptoms Eye contact - burning sensation; Skin contact - burning sensation.