Asus Rampage IV Formula - Manual (Page 85)

ROG RAMPAGE IV FORMULA 3-7
Chapter 3
ClockGen Full Reset [Enabled]
[Enabled] Enabled for better overclocking.
[Disabled] To skip system shutdown at BCLK frequency adjustment.
The above three items appear only when you set the Ai Overclocking Tuner item to
[Manual].
CPU CLOCK GEN Filter [Auto]
Configuration options: [Auto] [Enabled] [Disabled] [10UF] [20UF]
Memory Frequency [Auto]
Forces a DDR3 frequency slower than the common tCK detected via SPD.
Configuration options: [Auto] [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-
1600MHz] [DDR3-1866MHz] [DDR3-2133MHz] [DDR3-2400MHz] [DDR3-2666MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
Xtreme Tweaking [Disabled]
This item may help improve some benchmarks performance.
Configuration options: [Disabled] [Enabled]
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press the key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Load Elipida Hyper Profile
Change settings to suit Elpida Hyper Profile by selecting Yes.
Load Tight PSC Profile
Change settings to suit Tight PSC Profile by selecting Yes.
Load Loose PSC Profile
Change settings to suit Loose PSC Profile by selecting Yes.
Load RAW MHZ Profile
Change settings to suit RAW MHZ Profile by selecting Yes.
Rampage Tweak [Auto]
Mode 1 can help Memory Compatibility. Mode 2 can help overclocking and
performance. Configuration options: [Auto] [Mode 1] [Mode 2]