beautypg.com

Chapter 2 – Asus Rampage IV Formula User Manual

Page 53

background image

ROG RAMPAGE IV FORMULA

2-29

Chapter 2

3.

ASMedia

®

Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2 [red])

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0

Gb/s signal cables.

The SATA6G_E1/E2 (red) connectors are for data drives only. ATAPI device is not

supported.

• You must install Windows

®

XP Service Pack 3 or later versions before using Serial ATA

hard disk drives.

• When using NCQ, set the ASM1061 Storage Controller item in the BIOS to [ACHI].

Refer to section 3.5.6 Onboard Devices Configuration for details.