Asus Rampage IV Formula - Manual (Page 98)

3-20 Chapter 3: BIOS setup
Chapter 3
User Password
If you have set a user password, you must enter the user password for accessing the system.
The User Password item on top of the screen shows the default Not Installed. After you set
a password, this item shows Installed.
To set a user password:
1.
Select the User Password item and press .
2. From the Create New Password box, key in a password, then press .
3. Confirm the password when prompted.
To change a user password:
1.
Select the User Password item and press .
2. From the Enter Current Password box, key in the current password, then press
.
3. From the Create New Password box, key in a new password, then press .
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.