Asus Q87T - Manual (Page 23)

ASUS Q87T 1-15
3. ATX power connector (2-pin ATX19V)
This connector is for an ATX power supply. The plug from the power supply is designed
to fit this connector in only one orientation. Find the proper orientation and push down
firmly until the connector completely fits.
Q87T
Q87T DC power source
PIN 1
ATX19V
DC_JACK_IN
GND
4. Serial ATA 6.0 Gb/s connectors (7-pin SATA6G 1~4)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to [AHCI].
See section 2.6.4 SATA Configuration for details.
Q87T
SATA6G_3
GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND
SATA6G_1
GND RSATA_RXP3 RSATA_RXN3 GND RSATA_TXN3 RSATA_TXP3 GND
SATA6G_4
GND
RSATA_RXP2
RSATA_RXN2
GND
RSATA_TXN2
RSATA_TXP2
GND
SATA6G_2
GND
RSATA_RXP4
RSATA_RXN4
GND
RSATA_TXN4
RSATA_TXP4
GND
Q87T SATA 6.0Gb/s connectors