Asus SL1000 - Manual (Page 92)

Chapter 9. Configuring Firewall/NAT Settings Internet Security Router User ’s Manual
76
Figure 9.27. IP Pool Example – Add Two IP Pools – MISgroup1 and MISgroup2
2. Associate an IP pool to firewall ACL rules – inbound, outbound or group ACL by selecting “IP
Pool ” from the Source IP Type drop-down list and then choose an IP pool from the IP pool drop-
down list. In this example, IP pool is used to associate to source IP; however, it can be used to
associate to destination IP as well. As shown in Figure 9.28, MISgroup1 is not allow to play
networked game, Quake-II at all times.
Figure 9.28. IP Pool Example – Deny QUAKE-II Connection for MISgroup1
9.7.3 Configuring NAT Pool
9.7.3.1 NAT Pool Configuration Parameters
Table 9.9 describes the configuration parameters available for a NAT pool.
Table 9.9. NAT Pool Configuration Parameters
Field Description
NAT Pool Name Enter a name for the NAT Pool.
NAT Pool Type Select the type of NAT Pool and make appropriate IP Address entries.
Source IP Type drop-down list
IP Pool drop-down list