Asus SL1000 - Manual (Page 128)

Chapter 11. Configuring Remote Access Internet Security Router User ’s Manual
112
3. Click on the button to delete this user group. Note that a user group cannot be deleted
unless all the users belong to the group are deleted first.
To delete a user, simply click on the icon of the user in the Remote User List table in the User Group
Configuration page or follow the instruction below:
1. Open the User Group Configuration page (see section 11.2.2 Access User Group Configuration
Page – (Remote Access è User Group)).
2. Click on the icon of the user to be deleted in the Remote User List table or select the user
from the User drop-down list.
3. Click on the button to delete this user.
11.2.6 User Group and Users Configuration Example
Figure 11.2. User Group and Users Configuration Example
Example
Figure 11.2 displays the screen with entries to:
„ Add a new user group and a new user
•
Group “Sales”
•
User “Alan”
11.3 Configure Group ACL Rules
Group ACL is used to control access privileges for remote or local user groups. Its configuration is similar to
that for firewall inbound/outbound ACL rules, except two additional fields
– rule type and group name (see
Figure 11.3). For procedures to configure group ACL rules, please refer to section 9.3 or 9.4 for details.
11.3.1 Group ACL Specific Configuration Parameters
Table 11.2 describes the group ACL specific configuration parameters. The rest of the configuration
parameters are the same as those for firewall inbound/outbound ACL rules. Please refer to Table 9.1 and
Table 9.2 for details on common configuration parameters.
Table 11.2. Group ACL Specific Configuration Parameters
Field Description
Type
Select the type of traffic to which this rule should apply.
Inbound Select this if this rule is for inbound traffic.