Asus SL1000 - Manual (Page 77)

Internet Security Router User ’s Manual Chapter 9. Configuring Firewall/NAT Settings
61
Figure 9.13. Self Access Rule Configuration Page
9.6.1.1 Self Access Configuration Parameters
Table 9.4 describes the configuration parameters available in the Self Access configuration page.
Table 9.4. Self Access Configuration Parameters
Field Description
Protocol Select protocol from drop down list - TCP/ UDP/ICMP
Port Enter the Port Number.
Direction
Select the direction from which the traffic will be allowed.
From LAN Select Enable or Disable to allow or deny traffic from the LAN (internal
network) to the Internet Security Router.
From WAN Select Enable or Disable to allow or deny traffic from WAN (external
network) to the Internet Security Router.
9.6.1.2 Access Self Access Rule Configuration Page – (Firewall è Advanced è Self
Access)
Log into Configuration Manager as admin, click the Firewall menu, click the Advanced submenu and then
click the Self Access submenu. The Firewall Self Access Rule Configuration page displays, as shown in
Figure 9.13.
Note that when you open the Self Access Configuration page, a list of existing Self Access rules is also
displayed at the bottom half of the configuration page such as those shown in Figure 9.13.
9.6.1.3 Add a Self Access Rule
To add a Self Access rule, follow the instructions below:
1. Open the Self Access Rule Configuration page (see section 9.6.1.2 Access Self Access Rule
Configuration Page).