Asus V2-PH1 - Manual (Page 81)

ASUS Vintage2-PH1 5-17
Enhanced Mode Support On [S-ATA]
The default setting S-ATA allows you to use native OS on Serial ATA
and Parallel ATA ports. We recommend that you do not change the
default setting for better OS compatibility. In this setting, you may
use legacy OS on the Parallel ATA ports only if you did not install
any Serial ATA device.
The P-ATA+S-ATA and P-ATA options are for advanced users only.
If you set to any of these options and encounter problems, revert to
the default setting S-ATA. Configuration options: [P-ATA+S-ATA]
[S-ATA] [P-ATA]
IDE Detect Time Out [35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]