Asus V2-PH1 - Manual (Page 52)

3-14 Chapter 3: Starting up
Memory usage
The Memory tab shows both used
and available physical memory.
The pie chart at the bottom of the
window represents the used (blue)
and the available physical memory.
Configuring PC Probe II
Click to view and adjust the sensor threshold values.
The Config window has two tabs: Sensor/Threshold and Preference.
The Sensor/Threshold tab enables you to activate the sensors or to
adjust the sensor threshold values. The Preference tab allows you to
customize sensor alerts, change temperature scale, or enable the Q-Fan
feature.*
*Available on some motherboards only.
Loads the default
threshold values
for each sensor
Applies your
changes
Cancels or
ignores your
changes
Loads your saved
configuration
Saves your
configuration