Asus V2-PH1 - Manual (Page 37)

2-19 ASUS Vintage2-PH1
2.10 Re-connecting cables
You may have disconnected some cables when you were installing
components. You must re-connect these cables before you replace the
chassis cover.
LED cables
Connect the reset button, power switch, power LED, and HDD
LED cables to their respective leads in the system panel connector on the
motherboard.
IDE LED
Power LED
Power Switch
Reset button
I
®
F_PANEL
System panel connector
* Requires an ATX power supply.
PWR Ground
GND Reset
IDE_LED+
IDE_LED-
RESET
IDE LED
PWRSW
PWR_LED- PWRLED
PWR_LED+
Power LED