Asus P5G41T-M LX2 - Manual (Page 33)

2-8 Chapter 2: BIOS information
2.4.2 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press to display the submenu.
North Bridge Configuration
Memory Remap Feature [Enabled]
Enables or disables the remapping of overlapped PCI memory above the total physical
memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Enables or disables configuring DRAM Timing by SPD. Configuration options: [Enabled]
[Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the primary boot device. Configuration options: [IGD] [PCI/IGD]
[PCI/PEG] [PEG/IGD] [PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]
Allows you to select the amout of system memory used by the Internal graphics device.
Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 48MB] [Enabled, 64MB]
[Enabled, 128MB] [Enabled, 256MB]
GTT Graphics Memory Size [No VT mode, 2MB]
This item is not user- configurable.
DVMT Memory [256MB]
Allows you to select the DVMT memory. Configuration options: [128MB] [256MB]
[Maximum DVMT]
Protect Audio Video Path Mode [Lite]
This item is not user- configurable.
South Bridge Configuration
Audio Controller [Enabled]
Allows you to set the audio controller. Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Allows you to select the front panel support type. If High Definition Audio Front Panel is
used, set this item to [HD Audio]. Configuration options: [AC97] [HD Audio]
Onboard Gigabit LAN [Enabled]
Enables or disables the onboard LAN controller. Configuration options: [Enabled] [Disabled]
The [Maximum DVMT] option only appears when you have installed 1GB system memory
or more.
Onboard LAN Boot ROM [Disabled]
Enables or disables the boot ROM in the onboard LAN controller.
Configuration options: [Disabled] [Enabled]
For P5G41T-M LX2, this item shows Onboard LAN.