Asus P3C2000 - Manual (Page 79)

ASUS P3C2000 User’s Manual 79
4. BIOS SETUP
4. BIOS SETUP Power Up Control
Wake On PS2 KB/PS2 Mouse [Disabled]
Set this field to [Enabled] if you wish to use your PS2 keyboard, PS2 mouse, or
Consumer IR device to power up your computer. This feature requires an ATX
power supply that can supply at least 300mA on the +5VSB lead. The default
is set to [Disabled] because not all computers have the appropriate ATX power
supply. Your computer will not power ON if you set this to [Enabled] and do
not have the appropriate ATX power supply. Configuration options: [Disabled]
[Enabled]
Wake Up By Keyboard [Space Bar]
When the previous setup item Wake On PS2 KB/PS2 Mouse/CIR is en-
abled, you may specify the key(s) to press to power up the computer. Con-
figuration options: [Space Bar] [Ctrl-Esc] [Power Key]
Wake On USB Device [Disabled]
This field sets the way you may use your USB device/s, if any, to power up
the computer. This feature requires an ATX power supply that can supply at
least 2A on the +5VSB lead. The default is set to [Disabled] because not all
computers have the appropriate ATX power supply. Your computer will not
power ON if you set this to [Enabled] and do not have the appropriate ATX
power supply. NOTE: This jumper must be set in conjunction with 2) USB
Device Wakeup under 3.4 Motherboard Settings in 3. HARDWARE SETUP.
Configuration options: [Disabled] [Enabled]
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. You may configure
your system to power up at a certain time of the day by selecting [Everyday] or
at a certain time and day by selecting [By Date]. Configuration options: [Dis-
abled] [Everyday] [By Date]