Asus P3C2000 - Manual (Page 29)

ASUS P3C2000 User’s Manual 29
3. HARDWARE SETUP
CPU
3. H/W SETUP
2. Attach the Heatsink
NOTE: If provided, you should follow the heatsink attachment instructions
that came with your heatsink or processor. The following steps are provided
only as a general guide and may not reflect those for your heatsink.
Using SECC fan with Pentium ® II
Push the two lock arms one direction to clamp the heatsink onto the processor and
the other direction to release.
Using SECC2 fan with Pentium ® III
Insert the four heatsink’s pins through the holes of the SECC2. Place the metal clip
on the ends of the pins and slide until it locks into place.
NOTE: The SEPP heatsink and fan (for Intel Celeron processors) is similar to
the SECC2 heatsink and fan except that the clamping design is different.
Four Pins and metal clip
Lock Arm Lock Arm
WARNING! Make sure the heatsink is mounted tightly against the SECC2, SECC,
or SEPP; otherwise, the CPU will overheat. You may install an auxiliary fan to
provide adequate circulation across the processor’s passive heatsink.