Asus P3C2000 - Manual (Page 21)

ASUS P3C2000 User’s Manual 21
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
7) Voltage I/O Setting (JP5)
This jumper allows you to select the voltage supplied to the DRAM, chipset,
AGP, and PCI. The default setting of Normal should be used unless processor
overclocking requires a higher voltage (Test).
P3C2000 Input/Output Voltage Setting
Normal
(Default)
Test
1
2
3
1
2
3
JP5
P3C2000
®
3 0
WARNING! Using a higher voltage may help when overclocking but may result
in the shortening of your computer component’s life. It is highly recommended
that you leave this setting on its default.
8) MCH/MTH Voltage Selection (JP2702 / JP3)
These jumpers allow you to select the voltage supplied to the CPU’s I/O buffer.
The default setting of Normal should be used unless processor overclocking
requires a higher voltage (Test).
P3C2000 MCH/MTH Voltage Selection
JP2702 (MCH)
P3C2000
®
3 0
Normal
(Default)
Test
1 2 3 1 2 3
JP3 (MTH)
Normal
(Default)
Test
1 2 3 1 2 3