Asus P3C2000 - Manual (Page 45)

ASUS P3C2000 User’s Manual 45
3. HARDWARE SETUP
Connectors
3. H/W SETUP
17) Internal Speaker Connector (3-pin SPK) only on audio model
This connector lets you connect a chassis mounted speaker to the motherboard
instead of having to an external speaker onto the ATX connectors.
P3C2000 Internal Speaker Connector
SPKOUT
Ground
SPK
1
3
MIC2
P3C2000
®
3 0
18) ATX Power Supply Connector (20-pin block ATXPWR)
This connector connects to an ATX power supply. The plug from the power sup-
ply will only insert in one orientation because of the different hole sizes. Find the
proper orientation and push down firmly making sure that the pins are aligned.
IMPORTANT: Make sure that your ATX power supply can supply at least 10mA
on the +5-volt standby lead (+5VSB). You may experience difficulty in power-
ing ON your system if your power supply cannot support the load. For Wake-
On-LAN support, your ATX power supply must supply at least 720mA +5VSB.
P3C2000 ATX Power Connector
+3.3 Volts
-12.0 Volts
Ground
Power Supply On
Ground
Ground
Ground
-5.0 Volts
+5.0 Volts
+5.0 Volts
Power Good
+12.0 Volts
+3.3 Volts
+3.3 Volts
Ground
+5.0 Volts
Ground
+5.0 Volts
Ground
+5V Standby
P3C2000
®
3 0