Canon MultiPASS 10 - Manual (Page 12)

Canon MultiPASS 10 QRG ENGLISH
12
4 Remove the print head cap
from the new BJ cartridge. 5 Pull off the protective orange
tape. 6 Insert the BJ cartridge. Align
the slot in the cartridge with
the yellow post in the fax.
The yellow post (BJ cartridge
guide) should be visible
through the slot. The BJ
cartridge tilts slightly to the left
in the loaded position.
7 Lower the cartridge release
lever down until you hear a
click to lock the cartridge in
place.
Make sure the arm on the
cartridge release lever aligns
with the marking on the BJ
cartridge.
If the lever movement is not
smooth, release the cartridge
and reload it.
8 Close the front cover of the
fax.
2 Cleaning the Print Head
(102)
If you notice some degradation in the print quality, try cleaning the print head.
F
1 Press [FUNCTION].
SELECT MENU
ĭ
TEL REGISTRATION
CLEANING
03
2 Press [CLEANING].
HEAD CLEANING
The numbers in parentheses indicate the page in the MultiPASS TM 10 INSTRUCTION BOOK on which you can find further details.
ቢͰĢĴ a a a a aaaaa a a a aaaaaaaaaaaa