Asus M5A97/SI - Manual (Page 78)

3-26 Chapter 3: BIOS setup
Chapter 3
3.8 Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press to display the submenu.
3.8.1 ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press , a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press to
confirm your choice.
For more details,see section 3.10.2 ASUS EZ Flash 2.
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Be used to update BIOS
UEFI BIOS Utility - Advanced Mode
3.8.3 ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
The Setup Profile Status items show Not Installed if no profile is created.
• DO NOT shut down or reset the system while updating the BIOS to prevent the system
boot failure!
• We recommend that you update the BIOS file only coming from the same memory/CPU
configuration and BIOS version.
Lable
Allows you to input the label of setup profile.
Save to Profile
Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a
profile number from one to eight, press , and then select Yes.
Load from Profile
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile
number that saved your CMOS settings, press , and then select Yes.
> ASUS EZ Flash2 Utility
> ASUS SPD Information
> ASUS O.C. Profile
3.8.2 ASUS SPD Information
DIMM Slot # [Slot 1]
This item allows you to view the SPD information of the memory in each DIMM slot.
Configuration options: [Slot 1] [Slot 2] [Slot 3] [Slot 4]