Asus M5A88-V EVO - Manual (Page 73)

ASUS M5A88-V EVO 3-17
Chapter 3
Profile Info : xxxxMHz–x-x-x-xx
This item appears only when you set the CPU OverClocking item to [D.O.C.P.] and displays
the current DRAM profile information. The profile information varies according to the DRAM
O.C. Profile you’ve selected.
Overclock Options [Auto]
This item appears only when you set the CPU OverClocking item to [Overclock Profile] and
allows you to select an overclocking profile. Configuration options: [Auto] [Overclock 2%]
[Overclock 5%] [Overclock 8%] [Overclock 10%]
3.5.3 CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the FSB Frequency. Use the
<+> and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU
model.
The following two items appear only when you installed a 6-core CPU on this motherboard.
AMD Turbo CORE technology [Enabled]
Enables or disables the AMD Turbo Core technology. Configuration options: [Disabled]
[Enabled]
Turbo CORE Ratio [Auto]
Set the Turbo Core ratio. Use the <+> / <-> keys to adjust the ratio. The valid value ranges
vary depending on your CPU model. Configuration options: [Auto]
3.5.4 DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency. Configuration options: [Auto] [800MHz]
[1067MHz] [1333MHz] [1600MHz] [1867MHz]
The [1867MHz] does not appear when you install a AM3 CPU.
Selecting a very high DRAM frequency may cause the system to become unstable! If this
happens, revert to the default setting.
3.5.5 CPU/NB Frequency [Auto]
Allows you to set the ratio between the NB Clock and the CPU Bus Frequency. Configuration
options: [Auto] [1400MHz] [1600MHz] [1800MHz] [2000MHz]