Asus KFN5-D SLI - Manual (Page 125)

ASUS KFN5-D SLI 5-15
Manual configuration
a. Select Manual
configuration and press
. The selection
bar moves to the Physical
Drives menu.
b. Using the up or down
arrow keys, select the
source drive and press
.
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
c. Repeat step b to
select the target
drive.
d. After selecting the
source and target
drives, the following
pop-up menu
appears.
3. Select your desired method of configuration.
Auto configuration
a. Select Auto Configuration then press .
b. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press .
c. Press to confirm or to return to the Main Menu.
• Auto-configuration creates a RAID 1 set without a backup copy of
the current source disk data.
• When migrating a single hard disk drive to a RAID 1 set, use of the
Manual configuration is recommended.
MAIN MENU
Auto configuration
Manual configuration
Create with data copy
Create without data copy
• The Create with data copy option allows you to copy the current
data from the source drive to the mirror drive.
• Select Create with data copy if you have important data in your
source drive.
• The Create without data copy option disables the disk copy function
of the Mirrored set.
• If you selected Create without data copy, the RAID 1 set must be
repartitioned and reformatted to guarantee the consistency of its
contents.