Asus M3A78-EMH HDMI - Manual (Page 66)

RAIDXpert User Manual
60
feature is supported, the drive will pass SMART information to the SATA
controller when it polls the physical drives.
• Write Cache Status – Indicates whether the physical drive’s write cache is
Enabled or Disabled. You can change this status under the Settings tab (see
below).
• SATA – The SATA data rate of the physical drive, 1.5 Gb/s or 3Gb/s.
• Command Queue – Shows NCQ (Native Command Queueing) if supported
by this physical drive.
Making Physical Drive Settings
Physical Drive Settings allows you to enable or disable the Write Cache on an
individual physical drive. To access the physical drive setting:
1.
Click Physical Drive View in Tree View.
2. Click the Physical Drive on which you want to make settings.
3. Click the Settings tab in Management View.
4. Click the Enable or Disable options.
The options appear that the physical drives supports.
5. Click the Submit button.
Running Media Patrol – One Physical Drive
The Physical Drive–Media Patrol tab allows you to start Media Patrol on an
individual physical drive. You can also run Media Patrol on all physical drives at
the same time, see page 57.
For more information, see “Media Patrol” on page 107.