Asus P5Q - Manual (Page 106)

3-40 Chapter 3: BIOS setup
3.8.2 Drive Xpert Control [Auto]
Allows you to enable or disable the Drive Xpert feature.
Configuration options: [Auto] [Enabled] [Disabled]
3.8.3 Drive Xpert Mode Update [Last Setting]
This item appears only when you set Drive Xpert Control to [Auto] or [Enabled].
Set this item to [Mode Change] to show further settings of the Drive Xpert function.
Configuration options: [Last Setting] [Mode Change]
The following items appear only when you set Drive Xpert Mode Update to
[Mode Change].
Before using the Drive Xpert function, ensure that you have back up all your
data in your hard disks.
• EZ Backup erases all original data in the hard disk connected to the
SATA_E2 (white, port 1) connector on the motherboard.
• Super Speed erases all original data in both hard disks.
Update To Super Speed [Press Enter]
This item allows you to use Super Speed function. Plug two identical SATA
hard drives in the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1)
connectors on the motherboard and press the key.
Update To EZ Backup [Press Enter]
This item allows you to use EZ Backup function. Plug two identical SATA
hard drives in the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1)
connectors on the motherboard and press the key.
Update To Normal Mode [Press Enter]
This item allows you to use the SATA_E1 (orange, port 0) and SATA_E2
(white, port 1) connectors as normal SATA connectors.
When using one hard disk in Normal Mode, connect the hard disk to the
SATA_E1 (orange, port 0) connector on the motherboard.