4 onboard devices configuration, Onboard devices configuration -28, High definition audio [enabled – Asus P5Q User Manual
Page 94: Marvell ide [enabled, Atheros gigabit lan [enabled
3-28
Chapter 3: BIOS setup
3.5.4
Onboard Devices Configuration
High Definition Audio [Enabled]
Allows you to enable or disable the High Definition Audio Controller. The following
items appear only when you enable this item.
Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high-definition audio depending on the audio standard that the front
panel audio module supports. Configuration options: [AC97] [HD Audio]
SPDIF_OUT Mode Setting [SPDIF Output]
Set to [HDMI Output] if the VGA card has HDMI output and needs to use
SPDIF signal from the SPDIF_OUT header.
Configuration options: [SPDIF Output] [HDMI Output]
Marvell IDE [Enabled]
Allows you to enable or disable the onboard Marvell IDE controller.
Configuration options: [Enabled] [Disabled]
PCIE IDE Boot ROM [Enabled]
This item appears only when you set the previous item to [Enabled].
Configuration options: [Enabled] [Disabled]
Atheros GigaBit LAN [Enabled]
Allows you to enable or disable the onboard Gigabit LAN controller.
Configuration options: [Enabled] [Disabled]
LAN Boot ROM [Disabled]
This item appears only when you set the previous item to [Enabled].
Configuration options: [Disabled] [Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Onboard Devices Configuration
High Definition Audio
[Enabled]
Front Panel Type
[HD Audio]
SPDIF_OUT Mode Setting
[SPDIF Output]
Marvell IDE
[Enabled]
Marvell IDE Boot ROM
[Enabled]
Atheros GigaBit LAN
[Enabled]
LAN Boot ROM
[Disabled]
LSI Firewire 1394
[Enabled]
Serial Port1 Address
[3F8/IRQ4]
Enable or Disable
High Definition Audio
Controller
BIOS SETUP UTILITY
Advanced