Asus P5Q - Manual (Page 148)

4-36 Chapter 4: Software support
Configuring Super Speed
This mode allows two hard disks to access data simultaneously. The dual channel
design can largely enhance hard disk transfer rate.
• We recommend that you use two new hard disks for this setup.
• This setup erases all original data in both hard disks. Ensure to back up all
data in the hard disks before using this setup.
To start Super Speed configuration:
1. Click Super Speed from the main screen.
3. A warning message appears, reminding you that all original data in the two
hard disks will be erased. Click Ok to continue.
2. Click Apply to start configuration.
If you are in EZ Backup mode,
click Mode Change to return to
the main screen.
4. The setup is completed. Click Ok to
restart your computer at once.
If one hard disk is corrupt, all data in both hard disks will be lost.
5. After restarting your computer, the Drive
Xpert icon on the Windows ® notification area
turns green to indicate that Super Speed is
set up successfully.