beautypg.com

4 pch sata configuration, Pch sata configuration -21, Chapter 5 – Asus TS700-E7/RS8 User Manual

Page 91: Sata mode [ahci mode

background image

TS700-E7/RS8

5-21

Chapter 5

5.4.4

PCH SATA Configuration

SATA Mode [AHCI Mode]

Allows you to set the SATA configuration.
Configuration options: [Disabled] [IDE Mode] [AHCI Mode] [RAID Mode]

• If you want to use the Serial ATA hard disk drives as Parallel ATA physical

storage devices, set this item to [IDE Mode].

• If you want the Serial ATA hard disk drives to use the Advanced Host

If you want the Serial ATA hard disk drives to use the Advanced Host

Controller Interface (AHCI), keep the default setting [AHCI Mode]. The

AHCI allows the onboard storage driver to enable advanced Serial ATA

features that increases storage performance on random workloads by

allowing the drive to internally optimize the order of commands.

• If you want to create RAID sets with LSI MegaRAID utility, or Intel

If you want to create RAID sets with LSI MegaRAID utility, or Intel

®

Rapid

Storage Technology Enterprise from the Serial ATA hard disk drives, set this

item to [RAID Mode].

(1)IDE Mode. (2)AHCI

Mode.(3)RAID Mode.

SATA Port1

Not Present

SATA Port2

ASUS DWR ATAPI

SATA Port3

WDC WD800JD(80.0GB)

SATA Port4

Not Present

SATA Port5

Not Present

SATA Port6

Not Present

SATA Mode

[AHCI Mode]

SATA Controller 1

[Enhanced]

SATA Controller 2

[Enhanced]

S.M.A.R.T. Status Check

[Enabled]

Port 1 Staggered Spin-up

[Disabled]

Port 2 Staggered Spin-up

[Disabled]

Port 3 Staggered Spin-up

[Disabled]

Port 4 Staggered Spin-up

[Disabled]

Port 5 Staggered Spin-up

[Disabled]

Port 6 Staggered Spin-up

[Disabled]

Version 2.15.1219. Copyright (C) 2011 American Megatrends, Inc.

→←

: Select Screen

↑↓

: Select Item

Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Advanced