Asus TS700-E7/RS8 - Manual (Page 140)

6-20 Chapter 6: RAID configuration
Chapter 6
Using the Objects command
To check data consistency using the Objects command
1. From the Management Menu, select Objects, and then select Virtual Drive
from the sub-menu.
2. Use the arrow keys to select the virtual drive you want to check, and then press
.
3. Select Check Consistency from the pop-up menu, and then press .
4. When prompted, use the arrow keys to select Yes from the dialog box to check
the drive.
5. When checking is complete, press any key to continue.