Asus TS700-E7/RS8 - Manual (Page 126)

6-6 Chapter 6: RAID configuration
Chapter 6
3. Select all the drives required for the RAID set, and then press to
configure array setting.
4. Press to select the configurable array.
• The information of the selected hard disk drive displays at the bottom of the
screen.
• You need at least two identical hard disk drives when creating a RAID 1 set. You need at least two identical hard disk drives when creating a RAID 1 set.
• You need at least four identical hard disk drives when creating a RAID 10 You need at least four identical hard disk drives when creating a RAID 10
set.
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
Cursor Keys, SPACE-(De)Select F2-ChIdInfo F3-SlotInfo F10-Configure Esc-Quit
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 2 DISK 74.74GB HDS728080PLA380 05.01C05
0
Easy Configuration - ARRAY SELECTION MENU
PORT #
1
2
3
ONLIN A00-00
ONLIN A00-01
READY
READY
Select Configurable Array(s)
A-0
SPAN-1
5. Press again, the virtual drive information appears including a Virtual
Drive menu that allows you to change the virtual drive parameters.
Management
Configure
Initialize
Objects
Rebuild
Check Consistency
PORT #
0
1
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
Easy Configuration - ARRAY SELECTION MENU
Virtual Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 1 148.580GB 2 64 KB ONLINE
Virtual Drive 0
RAID = 1
Units= MB
Size = 152146MB
DWC = Off
RA = On
Accept
SPAN = NO
Choose RAID Level For This VD
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option