beautypg.com

Chapter 4 – Asus TS700-E7/RS8 User Manual

Page 61

background image

TS700-E7/RS8

4-5

Chapter 4

4. LSI MegaRAID or Intel RSTe selection jumper (3-pin RAID_SEL1)

This jumper allows you to select the PCH SATA RAID mode to use LSI

MegaRAID software or Intel® Rapid Storage Technology enterprise 3.0

RAID. Place the jumper caps over pins 1–2 if you want to use the LSI

MegaRAID software RAID Utility (default); otherwise, place the jumper caps

to pins 2–3 to use the Intel® Rapid Storage Technology Enterprise Option

ROM Utility.

5. ME firmware force recovery setting (3-pin ME_RCVR1)

This jumper allows you to force Intel Management Engine (ME) boot from

recovery mode when ME become corrupted.