Asus A7VI-VM - Manual (Page 63)

ASUS A7VI-VM User’s Manual 63
4. BIOS SETUP
4. BIOS SETUP
PCI Configuration
Reserved MEM Block BASE [No/ICU]
This field allows you to set the base address and block size of an onboard legacy ISA
device that uses any memory segment within the C800 and DFFF address range. If
you have such a device and you are not using an ICU to specify its address range,
select a base address from the six available options; the Reserved MEM Block
SIZE field will then appear for selecting the block size. If you have more than one
legacy device onboard that requires the use of this address range, you can increase
the block size to 8K, 16K, 32K, or 64K. If you are using an ICU to accomplish this
task, leave Reserved MEM Block BASE to its default setting of [No/ICU]. Con-
figuration options: [No/ICU] [C800] [CC00] [D000] [D400] [D800] [DC00]
PCI/PNP UMB Resource Exclusion