Asus P5QL - Manual (Page 47)

ASUS P5QL 2-25
2.7.2 Internal connectors
1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for a floppy disk drive (FDD) signal cable. Connect one end
of a FDD cable to this connector and the other end to the signal connector at
the back of the floppy disk drive.
• Pin 5 on the connector is removed to prevent incorrect cable connection
when using a FDD cable with a covered Pin 5.
• The FDD cable is purchased separately.
P5QL
FLOPPY
NOTE:Orient the red markings
on the floppy ribbon cable to PIN 1.
PIN1
P5QL Floppy disk drive connector
2. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF)
port. Connect the S/PDIF Out module cable to this connector, then install the
module to a slot opening at the back of the system chassis.
The S/PDIF module is purchased separately.
P5QL
SPDIF_OUT
+5
V
SPDIFOU
T
GND
P5QL Digital audio connector